Beat The Energy Price HikeEcoAirtec Double Trade Pallet
EcoAirtec Double Trade Pallet
The Ultimate Multi-Purpose Insulation
If you are looking for the most cost effective way to buy EcoAirtec Double – You have come to the right page. The EcoAirtec Double Trade Pallet is for those of you likely in the trade or wanting to order a large quantity of EcoAirTec Double, at the best rate.
What is EcoAirTec Double?
EcoAirtec Double is our best selling multi purpose foil insulation product. This material can be used in various applications such as Roofs, Walls, Floors, Conservatories, Sheds, Summerhouses, Windows and Doors, Motor Homes, Agricultural Buildings & Many More. Manufactured from true Aluminium foil either side of a 4mm air bubble membrane.
EcoAirtec is the best value insulation, with an exceptionally low m2 cost, when benefiting from it reflecting 95% of radiant energy! Equivalent to around 55mm of Polystyrene while only being 4mm thick it is most popular insulation for places where space is vital.
Enjoy benefiting from Free Next Working Day Delivery to anywhere in the UK Mainland, whilst also benefiting from the ancilary items that are included which include the ThermaSeal Foil Joining Tapes and a Heavy Duty Staple Gun Kit, with 5,000 Staples.
Choose from 4 Different Roll Sizes!
1050mm x 25m (1.05 x 50m)
1050mm x 50m (1.05 x 50m)
1200 x 25m (1.2 x 25m)
1500 x 25m (1.5x 25m)
Below is what you will receive in each EcoAirtec Double Trade Pallet;
- 9 x EcoAirtec Double 1.05m x 50m (472.50m²)
- 11 x Thermaseal Foil Joining Tape
- Free Heavy Duty Staple Gun & 5,000 Staples
- Free Next Working Day Delivery to any UK Mainland
- 15 x EcoAirtec Double 1.05m x 25m (393.75m²)
- 9 x Thermaseal Foil Joining Tape
- Free Heavy Duty Staple Gun & 5,000 Staples
- Free Next Working Day Delivery to any UK Mainland
- 15 x EcoAirtec Double 1.2m x 25m (450m²)
- 10 x Thermaseal Foil Joining Tape
- Free Heavy Duty Staple Gun & 5,000 Staples
- Free Next Working Day Delivery to any UK Mainland
- 12 x EcoAirtec Double 1.5m x 25m (450m²)
- 10 x Thermaseal Foil Joining Tape
- Free Heavy Duty Staple Gun & 5,000 Staples
- Free Next Working Day Delivery to any UK Mainland
We always recommend to fully tape and seal this product with our Thermaseal Foil Joining Tape. When EcoAirtec is fully taped up, it will also work as a high performing vapour control layer.
If you don’t need this quantity and would prefer rather order individual rolls? Order EcoAirtec Double Here
If you require a higher level of performance in your project see our EcoQuilt Expert – At 6mm when compressed this product is equivalent to 100mm of Rockwool!
Require a bespoke quotation or mixed pallet? Use our Call me Back option, and one of our dedicate team will call you within the hour!
Require more information? You can use the form via the link above or check out our Data Sheet / Fitting Sheet.
FREE GIFT
Spend £500 + VAT and Choose a FREE GIFT at the checkout!
Free Gifts Include: Thermaseal Foil Joining Tape, Heavy Duty Staple Gun Kit, Multifoil Insulation Scissors or Thermaseal Double Sided Tape.
EcoAirtec Double Insulation - High Performing Multi Purpose Foil Insulation
How To Install Airtec Double
-
Measure Area & Cut Insulation
Measure the area of the section you are insulating. Then roll out the insulation and cut to size. Our insulation can be cut with scissors or a cutting knife, both these can be found in our multifoil fitting kit.
-
Staple EcoAirtec Double
To gain the best thermal performance it is recommended to have an air cavity either side if the insulation. Staple the insulation directly on the studs or rafters at 300mm centres. Once the next layer is installed, either horizontally or vertically, ensure the product is overlapped by 50mm.
-
Tape and Seal with Thermaseal Foil Tape
It is vital to ensure the insulation is fully taped and sealed using Thermaseal Foil Joining Tape. Our Foil Tape is 75mm therefore this will cover a 50mm overlap. It is crucial to ensure the insulation is fully taped and sealed over all overlaps and around the perimeter. This ensure the product works as a high performance Vapour Control Layer.
-
Counter Batten Insulation
Once the insulation is fully covered and taped and sealed, to gain the best thermal performance we recommend installing a counter batten over the top. 19mm deep battens would be suitable, spaced apart around 500mm. This will create a solid finish to screw the internal board to.
-
Finish with Internal Boarding
Finish the project by installing internal boarding on the battens. Plasterboard, cladding or timber boards are popular options.
EcoAirtec Double Trade Pallet
Is this product perforated?
Airtec is un-perforated. It works instead as a vapour control layer. Once you have taped and sealed AirTec – you will prevent passage of moisture. This will in turn remove the risk of condensation.
Can this product be used under Laminate?
We would advise using EcoTec Floor Foam instead as the AirTec has air filled pockets, which could decompress under the weight and massively impact its thermal performance. The EcoTec Floor Foam has a dense foam membrane so is better suited for that application.
What’s the best way to install this?
We would advise applying AirTec by stapling it, to rafters / battens depending on your application. You should use 14mm staples, which come with our Heavy Duty Staple Gun Kit, if you don’t already have them.
Do I need a gap either side of the AirTec?
We do recommend that you have an air cavity either side of the product, to maximise its performance. It will trap low emissivity air within the cavity, enhancing its thermal performance.
Can I insulate over the top of electrical cables?
So long as the cables are not in direct contact with the AirTec, its ok to have the cables underneath. You could always encase them in trunking for extra protection. If you need to pull the cables through the insulation, that is also ok – just ensure you tape and seal around where you have cut.
Is Tape Essential?
It isn’t essential, but it is advisable for most applications. To achieve a vapour control layer you need to use the Thermaseal Foil Joining Tape around all of the edges and joints. You can always get in touch via our Contact Us Form, if you would like assistance on any specific application.
| Width | 1.05m or 1.2m or 1.5m |
| Length | 25m or 50m |
| Thickness | 4mm |
| Weight | 200g per m² |
| Foil Emissivity | 0.05 |
| Reflectivity | 95% |
| Water Vapour Resistance | 600MNs/g |
Reviews
There are no reviews yet