SPC-Lux Flooring Fitting Kit
SPC-Lux Flooring Fitting Kit
Professional-Grade Flooring Fitting Kit
This kit comes complete with everything you will require to install you SPC-Lux Flooring, conveniently. It also enables you to accurately install laminate or hardwood flooring.
We have considered every element, to make the process as easy as possible. This is suitable for both professional and homeowner use.
What’s in the SPC-Lux Flooring Fitting Kit?
- Rubber Tapping Block
Made up of thick rubber, which avoids damage to the SPC-Lux Flooring whilst ensuring that the joints are tight.
- A Pull Bar
When you have installed the last SPC-Lux Flooring Panel, you can insert the top link in to the gap between the floor and the wall – this will help you close the gaps in the UNILIN system.
- A Double Headed Hammer (255 x 75 x 50mm)
Composing of a rubber side and a sturdy plastic side. The bottom of the handle is wrapped in a rubber coating, which ensures that you have a secure grip and also prevents you feeling the vibrations – which overall lends to a more enjoyable installation experience.
- 20 Spacers
Choose to allow for either a 3 or 6mm expansion gap, around the perimeter of the room. This isolates the space between the floor and the corners.
- Profile Gauge
This reproduce complex profiles; it will assist you when going around radiator pipes, door frames / architraves. You can then transfer them on to the flooring
- Set Square
Allows you to quickly and accurately ensure square and level marking of angles.
This ensures you have a clean cut finish, when cutting the flooring panels.
This is commonly ordered alongside SPC-Lux Flooring.
How to Video
See how easy SPC-Lux is to Install by viewing our How to Video.
If you order before 2pm, you can benefit from a Next Working Day Delivery Service.
If you have any further queries, or if you would like to speak to a member of our team – please just submit an enquiry HERE
How To Install the SPC-Lux Flooring Kit
Installing the SPC-Lux Flooring System is easy by following this brief video. Reduces energy bills in just 9mm depth. Why choose inferior products such as Laminate and LVT again?
SPC-Lux Insulated Flooring Kit - Reduce Energy Bills In Just 9mm!
The future of flooring, now available to the UK! Why use inferior products such as Laminate and LVT again?
How to Install SPC-Lux Flooring
Measure the area of the Room
Once the EcoTec Floor Foam has been installed - measure the total area required, using a tape measure. You should measure the width and length.
Start Installing SPC-Lux
Begin at the back corner of the room, laying the SPC-Lux Flooring. Our recommendation would be to start with a a full board, just cut the final piece - when you come to the end of your run. This will start a scattered pattern.
Cutting the SPC-Lux
To cut the SPC-Lux you should use the Knife and the Set Square provided within the kit, to ensure that you have a perfect straight finish. Once you have scored the SPC Flooring Panel, you can then snap the board. TIP: Do not cut over a board that is down you'll risk scraping it as you'll apply pressure. Either go elsewhere to cut your SPC-Lux or you can flip an unused board over and use that as your base.
UNILINC Locking System
The SPC-Lux Boards are clicked together using the UNILINC Locking System, which makes the install easier than alternative Floorings. You'll be able to feel the board clicking in to place.
Tapping Block and Mallet
Use your Tapping Block and the Mallet that is provided in the Kit, to ensure than the panels are secured together nicely. The Mallet is rubber, so will not damage the SPC-Lux Panels.
Getting around the tricky bits...
Within the kit you will have a Profile Gauge, this goes around shapes and replicates them - to ensure you can replicate the shape on the SPC Lux Flooring. To do this you place the Profile Gauge over the Flooring and mark the area required to remove. You can then cut the shape out of the flooring using a jigsaw.
When you get near the edge it makes sense to then use the Pull Bar, so you can ensure that the Flooring is securely in to place all around the perimeter of the room. Use the Pull Bar in conjunction with the Mallet.
If you have any radiator pipes, using the Profile Gauge to get half of the curve of the radiator pipe and draw this shape on the end of your board. Do the same on another board, for the other side. Use the jigsaw to make the cut and slot each piece around the pipe. You may then wish to finish with pipe covers if necessary.
- Suitable for both domestic and professionals.
- Can be used to install SPC-Lux Flooring, but also laminate and wooden flooring.
- Everything you need to make the installation process easier.
- This is included as part of the SPC-Lux Insulated Flooring Kit.
- Next Day Delivery to anywhere in the UK Mainland
Downloads & Resources
picture_as_pdf Data Sheets