Order Before 2pm For Delivery on

Free Next Day Delivery

FREE NEXT WORKING DAY DELIVERY

Orders £100+VAT. Excludes Bank Holidays.

Free Next Day DeliveryFree Next Working Day Delivery

Free Next Day DeliveryBeat The Energy Price Hike

EcoPro Ceiling Insulation Kit

EcoPro Ceiling Insulation Kit

Want it by ?

Order within for free next working day delivery throughout mainland UK, excluding bank holidays.

Quantity
[onsite_messaging data-key="credit-promotion-badge" data-theme="light"]
expand_circle_down Description

EcoPro Ceiling Insulation Kit

If you are finding it hard to keep your energy bills down when trying to keep your home an ambient temperature, it is likely your home is poorly insulated.

Equally, if you suffer from damp and mould growth the likelihood is you require more insulation, as this develops from fluctuations in temperature causing condensation.

Why Insulate Your Ceiling?

By insulating your ceiling, you will see a reduction in your energy bills. This is because if you have an uninsulated ceiling, exposed to the external elements 25% of the heat energy leaving your account, is literally escaping above you (wasted).

Insulating your ceiling is therefore a very worthwhile investment. By installing the EcoPro Ceiling Insulation Kit, you can start saving and get a return on your investment every single year!

If you do not insulate your Loft, this in effect means you are consuming 25% more energy than is necessary to get the same level result as someone who does have effective Loft Insulation.

What  is included in the EcoPro Ceiling Insulation Kit?

  • EcoQuilt Expert 1.5 x 10m (15m²)

EcoQuilt Expert is a 6 layer reflective multifoil insulation. It is just 15mm thick, but compresses to just 6mm when installed. Although thin, EcoQuilt equates to 100 of Fibre / 50mm of PIR in terms of its thermal performance. You can therefore save on installation time, as well as space and cost! 

  • Thermaseal Foil Joining Tape

This is to tape and seal the joints and the edges – which creates your vapour control layer.

  • Heavy Duty Staple Gun Kit

Within the kit, you benefit from a Heavy-Duty Staple Gun. This also comes complete with 5,000 x 14mm Staples. These are an ample depth to secure the EcoQuilt Expert into place. 

  • 10″ Multifoil Insulation Scissors

You can use these Stainless Steel Scissors, to make any necessary cuts easily.  

If you are looking for even more heat retention, you can double up on the EcoQuilt Expert and you can double the performance if you pop a batten between the two layers (to enable it to reflect and perform.

Free Next Working Day Delivery

We offer a next working day delivery service, on all orders placed pre 2pm. 

Want a delivery to Northern Ireland? If so, enquire HERE!

You can install this Insulation yourself, by simply installing a set of 25mm battens to the underside of your ceiling. Then stapling the Multifoil to the underside of your ceiling. Ensure that you overlap each layer by 50mm and fully tape and seal the product, with our Thermaseal Foil Joining Tape. This will ensure that you also benefit from a vapour control layer. This VCL means you’ll not suffer from condensation or mould formation.

One of the main advantages of this kit is that you save on the installation cost, you genuinely do not need professional installers, as the insulation within the kit is free from any harmful floating fibres and it is easy to install.

Get in touch by Message or  Callback.

You can also call us directly on 0114 323 0029

FREE GIFT

Spend £500 + VAT and Choose a FREE GIFT at the checkout!

Free Gifts Include: Thermaseal Foil Joining Tape, Heavy Duty Staple Gun Kit, Multifoil Insulation Scissors or Thermaseal Double Sided Tape.

expand_circle_down How-To Videos

How to install a single layer of EcoQuilt Expert to your loft ceiling

How to install a double layer of EcoQuilt Expert to your loft ceiling

How To Insulate Your Loft Ceiling To Save on Energy Bills

expand_circle_down How-To Guides

How to Insulate your Loft Ceiling

  1. Install your first run of EcoQuilt Expert

    Decide whether you would like to insulate vertically or horizontally, this decision usually depends on the length of your Roof Rafters. Then, roll out the Insulation and measure the amount of material required for a strip and cut, using the Multifoil Insulation Scissors supplied within the Loft Ceiling Insulation Kit: https://www.ecohome-insulation.com/product/loft-ceiling-insulation-kit/

  2. Staple the EcoQuilt Expert in to Place

    We advise that you staple every 300mm, to ensure that the Multifoil Insulation is held securely in place. Top Tip: Make sure the EcoQuilt is pulled taught, this will compress the layers and make the stapling process easier.

  3. Install the next Layers of Multifoil

    Ensure that you overlap the EcoQuilt by 50mm (minimum) - this will help to ensure that you have a continuous insulation layer. Failing to overlap will impact the performance, as it will allow for air to pass through.

  4. Counter Batten (Optional)

    Once all of your Roof Rafters are fully covered, you have successfully Insulated. If you are just using your loft for storage purposes, you may opt to leave your insulation exposed. If not, you can counter batten. Use 25mm x 38mm battens, these can be installed at right angled to the rafters. You can use battens that are deeper than 25mm should you wish. Battens will also be required for around the perimeters too.

  5. Internal Finish

    You can now screw the plasterboard into the battens.

  6. Want to Double the Performance?

    You can - You just Install two layers. This process is a little different, so if you do opt to install two layers, read from here. Roll out the Multifoil Insulation, but instead of stapling it to the front of the rafters - you want to staple it to either side of the joist (halfway up). By doing this, you will create an air cavity either side of the product even when you add your second layer.

  7. Staple Next Layer

    Overlap the next layer of Multifoil again by 50mm. Continue this process until you have full coverage all over.

  8. Install your Second Layer of EcoQuilt

    The second layer of insulation should be installed taught across the joists, so you have an air gap behind it. Staple the second layer to the front of the Roof Rafters. When you have a continuous double layer - you can then decide whether you wish to leave it exposed / board. Head to step 4 if you would like to board over the Insulation.

expand_circle_down Reviews

Reviews

There are no reviews yet

Add a review
Currently, we are not accepting new reviews
expand_circle_down Q&As

Can I double up on the insulation?

Yes, you can do two layers of the EcoQuilt Expert Insulation. We recommend using a 25mm wooden batten over the first layer of insulation and attaching the second layer to the wooden battens. Or if the rafters of your loft are long enough you can recess the first layer of insulation into the rafters and then the second layer can sit across the rafters.

What should I use to cut the insulation?

In this kit, we provide a pair of 10” multifoil insulation scissors which are perfect for the job.

How do I measure the loft ceiling (under rafter)?

Measure the internal length (X) of the loft then measure the internal height (Y) from the Eaves to the Ridge at the top of the loft. Multiply X by Y this will give you Z. If you have two sloping roof sections multiply Z by 2. This will give you the total square meterage of your loft ceiling.

Do I need to overlap the insulation?

Yes, you do need to overlap the insulation otherwise you won’t get the best thermal performance. We don’t recommend taping and sealing the insulation in this application so overlapping the insulation will stop any draughts from getting in and warm air from escaping.

Will the foil insulation cause any problems with damp?

No, actually this will help prevent damp and mould and it’ll help reduce the risk of condensation.

Can I board over this insulation?

Yes, you can board over this insulation by adding wooden battens over the top of the insulation and attaching what you’d like to board over with to the wooden battens.

Do I need any specific PPE to complete this job?

No, you don’t need any protective clothing, masks, or safety goggles as there are no harmful fibres in the insulation.

expand_circle_down Specification
Length10m
Width1.5m
Thickness 15mm (5mm Compressed)
Roll Coverage15m²
Layers6
Weight5.5KG
Core R-value0.93m²K/W
Roof R-value1.83m²K/W
Wall R-value2.27m²K/W
Floor R-valueup to 5.56m²K/W
Foil Emissivity0.05
Water Vapour Resistance600MNs/g

Key Features

  • Reduces Energy Bills
  • Takes up minimal space
  • Exceptional value for money
  • Retains heat in the winter
  • Reflects excessive heat away in the summer
  • No Itchy Fibres
  • Prevents Condensation
  • Vapour Control Layer (VCL)
  • Prevents mould build up
  • Prevents damp
  • No Protective Equipment Required
  • Easy to Install Yourself
  • Only 15mm Thick / Compresses to 6mm
  • Equivalent to 100mm of Fibre Glass
  • Lasts the Lifetime of the building

Ecohome-Insulation.co.uk Logo